Categories
Product Features
? It has extremely high tensile strength, excellent tear strength and abrasion resistance.
? Excellent weather resistance , low temperature resistance.
? Good flame retardant effect.
? Excellent processability, can be extruded and cast.
? It has good low temperature resistance, with a temperature range from -40 ℃ to 125 ℃ . Compared with other 糖心视频s, this product can still maintain good properties when the temperature is below 0 ℃ .
XG1185-02 is a polyester TPU. On this basis, the functional film modified by adding flame retardants has good flame retardant effect and can be used for aircraft floor waterproof pads, nuclear power plant protective clothing, etc.
? It has extremely high tensile strength, excellent tear strength and abrasion resistance.
? Excellent weather resistance , low temperature resistance.
? Good flame retardant effect.
? Excellent processability, can be extruded and cast.
? It has good low temperature resistance, with a temperature range from -40 ℃ to 125 ℃ . Compared with other 糖心视频s, this product can still maintain good properties when the temperature is below 0 ℃ .
The following technical information and data are representative values or typical values , should not be used as a product specification.
Typical Product Features
Characteristic | Value |
TPU film thickness | 0.10-1.0 mm |
Width | Regular width 1450mm (depending on customer request customization) |
Length per roll | 30-50m |
Surface effect | Double-sided foggy |
Flame retardant grade | V0 |
Typical physical properties
Test Item | Test Standard | Unit | Test Value |
Hardness | ASTM D2240 | Shore A | 85 |
Thickness | ASTM D3767 | mm | 0.100 |
Density | ASTM D792 | g/ cm? | 1. 21 |
Color | Visual inspection | / | Double-sided foggy |
Tensile Strength | ASTM D412/Die C | MPa | CD: 54.55 MD: 55.63 |
100% MOD | ASTM D412/Die C | MPa | CD: 6.03 MD: 6.47 |
300% MOD | ASTM D412/Die C | MPa | CD: 12.64 MD: 14.99 |
Elongation at break | ASTM D412/Die C | % | CD: 575 MD: 599 |
Tear Strength Note 1 | ASTM D624 | KN/m | CD: 114.93 MD: 109.23 |
Flame retardant | UL94-2013 Rev.14-2022 Section 8 | / | V0 |
Note 1: The punch used for tear strength is a right-angle punch | |||
Place the film in a clean place , stay away from over humidity. Keep out of direct sunlight. Keep at a temperature of 16 -27°C Degree and 40-60% Store in original packaging under relative humidity conditions.
For best performance , this product should be used within 12 months from the date of production.
Inquiry Now
