Categories
Product Features
? High mechanical strength, outstanding load-bearing capacity, impact resistance and shock absorption performance.
? Outstanding cold resistance, low glass transition temperature.
? Good puncture resistance, detergent resistance, can be washed multiple times.
? Wear-resistant, aging-resistant, tear-resistant, and waterproof.
XG1295 series is a Ester-based 95 hardness medical inflatable mattress, made of imported raw 糖心视频s, with high tensile strength and good puncture resistance.
? High mechanical strength, outstanding load-bearing capacity, impact resistance and shock absorption performance.
? Outstanding cold resistance, low glass transition temperature.
? Good puncture resistance, detergent resistance, can be washed multiple times.
? Wear-resistant, aging-resistant, tear-resistant, and waterproof.
? Good welding.
The following technical information and data are representative or typical values and should not be used as product specifications.
Typical Product Features
Feature | Value |
TPU Film Thickness | 0.2mm |
Width | Regular 1050mm |
Roll Length | 120m |
Surface | One side Glossy and One Side Matte/Blue |
Typical Physical Properties
Test Item | Test Method | Unit | Test Value |
Width | Tapeline | mm | 1070 +10 |
Thickness | ASTM D3767 | mm | 0.2±0.015 |
Surface finish | Visual comparison with standard sample under D65 light | / | Gloss one side and matte one side |
Color | Visual comparison with standard sample under D65 light | / | Blue and no obvious color difference |
Hardness | ASTM D2240 | Shore A | 95±3 |
Density | ASTM D792 | g/cm3 | 1.23±0.03 |
Tensile Strength | ASTM D 412/Die C | MPa | CD:＞55 |
100% Modulus | ASTM D 412/Die C | MPa | CD:＞10 MD:＞10 |
300% Modulus | ASTM D 412/Die C | MPa | CD:＞25 MD:＞30 |
Elongation | ASTM D 412/Die C | % | CD:＞400 |
Tear Strength | ASTM D 624 | KN/m | CD:＞120 |
Puncture Test | GB/T 37841-2019 | N/mm | ＞100 |
Constant temperature and humidity 48H COF (Glossy to Glossy)
| GB/T1006-1988 | / | <0.64 |
Notes:
1. The above data are provided by the technical department, just for reference only. Please do not regard it as a guarantee or basis. It is suggested that enterprises should test before processing, then formally put into production in large quantities if up to the standard.
2. TPU film should be stored in a dry and well-ventilated indoor environment, it should be used or sealed as soon as possible if the film opened.
3. Please contact our technical department if any problems during the use of the product info@xgtpu.com.
Store the film in a clean place away from excessive moisture and direct sunlight. Store in the original packaging at 16-27°C and 40-60% relative humidity.
For best performance, this product should be used within 12 months from the date of production.
Inquiry Now
