糖心视频

TPU film is a new type of mobile phone screen protective film, which is made of a special 糖心视频. Compared with traditional PET film, TPU film has better wear resistance, scratch resistance and anti-bubble performance. Below, we will introduce how to install TPU film correctly.

Step 1: Preparation

Before installing TPU film, you need to prepare some tools: cleaning cloth, vacuum cleaner, tape, scraper and TPU film. It should be noted that you must choose a TPU film suitable for your mobile phone model.

Step 2: Clean the screen

Before installing the TPU film, the mobile phone screen must be thoroughly cleaned. You can use a cleaning cloth and vacuum cleaner to clean the screen. Pay special attention to cleaning the edges of the screen, as these are the places where dirt and grime are most likely to accumulate.

Step 3: Apply the tape

After cleaning the screen, you can place a strip of tape above and below the screen. This makes it easy to stick the TPU film on the phone screen.

Step 4: Place the film on the screen

Place the TPU film on the phone screen, aligning it with the edges and openings of the screen, being careful not to leave any air bubbles. If bubbles appear, use a spatula to gently squeeze them out.

Step 5: Remove the protective film

Slowly peel off the protective film on the TPU film, being careful not to tear the film apart. After peeling off the protective film, you can use a scraper again to squeeze out the air bubbles.

Step 6: Complete the installation

After installation is complete, wipe the screen with a clean cloth to ensure that the TPU film is tightly attached. At this point, your phone screen is perfectly protected.

In short, it is not difficult to install TPU film, as long as you follow the above steps, you can easily complete it.

Our Company's Products

TPU Laminated Fabric、TPU Car Film、TPU Hotmelt Adhesive Film、TPU Tubing、TPU Tape、TPU Functional Film

TPU Bulletproof Film、Aliphatic TPU Film、PU Film、PTFE Film、Medical TPU Film、TPU elastic band